Products

Accessories

Digital Satellite precision finder DSF 90/E HD

The DSF90E HD is compatible with all the manual satellite systems and enables the user to fi nd the desired satellite in just a few quick and simple steps.

Currently, the biggest diffi culty in manually aligning a dish with a satellite broadcasting digital TV signals is the fact that there is some delay before the digital signals are displayed on LCD TV screens, and so the user is forced to carry out the alignment with a very slow movement in order to avoid the risk of going past the required satellite without realising it.

The DSF90E HD is the solution to this problem.

It has a meter that indicates immediately the strength of the signal being received from the desired satellite.

Unlike ordinary dish aligners, there is no delay and, again unlike those systems, the DSF90E HD also tells you if the satellite you have found is the right one.

There are 8 satellites pre-programmed in its memory.

The DSF90E/HD is the same as the DSF90 HD, but it is designed specifi cally for Teleco Matic and Digimatic systems and has an integrated elevation detector.

So as well as the functions described for the DSF90HD, the DSF90E/HD also enables the elevation to set accurately.

DSF90 E HD

User’s instructions:

DSF90/E - 1

1) Select the required satellite (eg. ASTRA 23).

DSF90/E - 2

2) Raise the dish until the correct elevation is indicated (see the elevation map).

DSF90/E - 3

3) Turn the dish SOUTHWARDS until DSF90E/HD emits a continuous "BEEP" sound.

DSF90/E - 4

4) Wait for the SAT OK LED to illuminate.

DSF90/E - 5

5) If the alignment has been made to the wrong satellite, the SAT NOT OK LED will illuminate and the dish must be rotated again until the "BEEP" sound is heard again and the SAT OK LED illuminates.

DSF90/E - 6

6) When the maximum number of LEDs are illuminated on the LEVEL indicator, the dish has been properly aligned.