• Global System
• EG20
  • Description
  • Advices
  • Accessories
  • Installation
  • Kit-Handbook
  • Restricted Area
  • Spare parts (films
    and pictures)
    • Eg20B
    • Eg20E
• BRIDGE
  • Description
  • Advices
  • FAQ
  • Installation
  • Kit-Handbook
• Time Switch
  • Description
  • Advices
  • Installation
  • Handbook
• Multi Energy Function
  • Description
  • Advices
  • Handbook
  • Installation
• Technical Assistance
  • Assistance EG20 online
  • EG20 in factory
• Global System map

BRIDGE ADVICES

id
BC01	Advices for the choice of the batteries to be used
BC02	Fornormal use
	set theBridge in "Automatic" "(or OFF) mode
BC03	Customers having the SELF ENERGY EG 20 with the new trigger box item n. 932.186 do not need to do any modification.
	1- Set the Bridge to "Manual" (yellow LED ON, green LED OFF) If you have a Self-Energy EG20, push the manual start switch Using a load Note 1: with heavy loads, the connection works from 5 to no longer than 30 minutes. Note 2: After using the load, it is necessary to set the Bridge to Automatic connection and perform a battery charge cycle (through the "Self-Energy EG20" or other energy sources).
BC04	Use as support in case of discharged engine battery of the vehicle.
	It is possible to use the leisure battery charge: - A1) switch off all appliances ( also headlights, lights etc). - A2) set the Bridge to manual mode if you have a Self-Energy EG20, push the manual start switch After 10 minutes, try to start the vehicle.