COMFORT DURING SUMMER TIME
The Self Energy works even at +50°C, and if you want to refresh your caravan or have a constant air exchange, you can use ventilators or coolers without any worry for the quantity of energy they require.
3 MODELS FOR ANY NEED
EG20
EG20MEF
EG25MEF |
COMFORT IN WINTER
The Self Energy works also at –25°C, and offers the maximum of comfort even in the coldest months.
|
Multi Energy Function (MEF) This optional allows to choose the most adapted functioning mode for each situation; particularly indicated to optimise the functioning on high mountains. The MEF is serially installed on the models Eg20MEF and Eg25MEF. The optional can be installed on all Eg20 produced after 2005. |
MAXIMUM SAFETY AND MINIMUM ENCUMBRANCE The external installation under floor offers highes security, avoiding to occupy precious space inside the caravan. |
MAXIMUM FLEXIBILITY IN USE AND LOW NOISE Motor caravanners do not want to disturb their surrounding, how can the Self Energy help them? The functioning of the generator is distinguished by a very low and muffled noise level. If wanted, the functioning periods can be programmed, thanks to the optional Time Switch (optional). |
LOW CONSUMPTION During winter, the Self Energy weighs lightly on the general consumptions; in summer the Self Energy offers very long periods of energetic autonomy.
COMPACT AND LIGHT SELF ENERGY : High engineering and exclusive container made of half shells. Only 19 Kg and the height of only 25 cm allow interesting solutions also for caravans with lowered chassis.
|
Frost ? No problem for SELF ENERGY.
<---click to enlarge |
Choose the leisure batteries capacity that best suits your requirements.
<---click to enlarge
The best capacity? Two 100 Ah Batteries. |
(A3) Wiring / connections diagram. |
Kit SELF ENERGY
EG20
EG20MEF
EG25MEF |
(B2)
The Eg20 is controlled by a specific ELECTRONIC SWITCHBOARD (picture on the left) which is usually fitted in a locker. A small REMOTE MODULE provides warning signalling and enables control (picture on the bottom right).
|
(B 4-1)
Fitting with bracket cod.932.067 |
(B 4-4)
Installation through bracket 932.067
"PILOTE" MOTORHOME. |
(C 2)
Bracket 932.074A it is used to fit the EG20 in a locker which has to be hermetically sealed and isolated from the motorhome cab (the locker has to be used like a gas bottle locker). |
(D 3)
Bracket 932.074A + 932.145 is used to fit the EG20 under the floor of some motorhomes with Al-Ko chassis. In the picture motorhome "ARCA" with "AL-KO" chassis |
(E 3)
Bracket 932.074A + 932.146 It is used to install the EG20 under the floor of some motorhomes with a "floor panelled/lowered" Ducato chassis In the picture a motorhome "LAIKA" with "lowered Ducato" chassis |
(G 1)
The cooling air of the “Dynamo-Motor” set can be piped to the gas bottle, to the engine, or to the exhaust valves locker. DOT NOT pipe the air into the motorhome! |
(G 3)
EXAMPLE.
The warm air of the cooling system is piped to the discharging valve. |
(H 1)
The oil minimum level is indicated by a warning light on the remote module and causes the EG20 to stop automatically. |
(H 2)
Remote Oil Tank cod. 931.142.
is used for particular fittings (motorhomes with Al-Ko lowered chassis) or according to specific needs of the user. |
(H 3)
Example of oil topping-up through 931.142 |
( L 1)
OPTIONAL --> 932.122 With this kit it is possible to establish the starting point of the Eg20.
Suitable for batteries with a capacity > 200 Ah. Starting thresholds:
12,04 V / 12,18 V / 12,32 V |
( N )
Additional Noise damper
(Optional) --> 931.120A
<---click to enlarge |
 (A2)
Working TEST by simulating a temperature of -25 °C |
 (B2.1 )
Programmable Timer (cod. 932.218)(cod. 932.218).
New !
|
 (B2.2 )
Double frame ( cod. 932.227)
|
